Fax rx speed, Operation, Tone detect – Panasonic KX-F195 User Manual
Page 87: Fax rx speed -2, Tone detect -2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FAX RX SPEED
The unit automatically selects the optimum receiving speed depending on the line condition and the
type of the other facsimile unit. If you frequently experience problems such as reception errors
caused by poor line condition, set to “4800 BPS“.
9600 BPS: Maximum speed of 9600 bits per second. (Default)
4800 BPS: Maximum speed of 4800 bits per second.
Operation
“I Press the PROGRAM button.
The PROGRAM indicator lights and the display shows “P-_".
2
Press then press “18“ for FAX RX SPEED setting.
The display shows “P-Fl
8
1 ".
3
Press “1“ or “2”.
(1
=9600 BPS, 2=4800 BPS)
4
Press the SET button to store your selection in memory.
5
Press the PROGRAM button to end the operation.
The PROGRAM indicator goes out.
TONE DETECT
The unit automatically disconnects the line when it detects a busy tone after dialing in on-hook
dialing mode.
OFF: The unit does not detect a busy tone. (Default)
ON:
The unit detects a busy tone.
Operation
*1 Press the PROGRAM button.
The PROGRAM indicator lights and the display shows “P-_",
2
Press “#", then press “20" for TONE DETECT setting.
The display shows “P-F20 2".
3
Press "1” or “2”.
(
1
=ON, 2=OFF)
4
Press the SET button to store your selection in memory.
5
Press the PROGRAM button to end the operation.
The PROGRAM indicator goes out.
5-2