Panasonic WJ-MX30 - Manual (Page 26)

F. Basic Operation 5
Fade
Synchronized fading makes it possible to operate the
Video, Downstream Key and Audio fades together, or in
any combination. Each of the three can be controlled
independently via Auto Fade. The following area shows
the FADE CONTROL section.
Note :
The VIDEO (62), DSK (63) and /or AUDIO (64) signals can
fade out to one of the following : MATTE (66), WHITE (67),
BLACK (68) signal.
F-1. Video Fade-Out (In)
• Adjust the TRANSITION Control (60) to the desired auto
fading time.
• Press the VIDEO Button (62).
• The LED on this button lights.
• Press the Auto Fade Button (65).
• The LED on this button lights.
•
Fade Out Indicator (69) starts blinking (as the fade-out
progresses).
• After fade-out, the Fade Out Indicator remains lighted.
•
Fade-in operation is made by pressing the Auto Fade
Button (65) when the Fade Out Indicator remains
lighted.
After Fade-in, the Fade Out Indicator and LED on the
Auto Fade Button go out.
Auto-fade can be stopped by pressing the Auto
Fade Button (65).
The LED on the VIDEO Button (62) blinks while auto
fade is in the stopping process. Auto-fade starts
again when the Auto Fade Button(65) Is pressed.
F-2. Down stream Key Fade-Out (In)
• Adjust the TRANSITION Control (60) to the desired auto
fade time.
• Press the DSK Button (63).
• The LED on this button lights.
•
Press the Auto Fade Button (65) to execute the auto
downstream fade.
• The LED on this button lights.
•
Fade Out Indicator (69) starts blinking (as the fade-out
progresses).
• After fade-out, the Fade Out Indicator remains lighted.
•
Fade-in operation is made by pressing the Auto Fade
Button (65) when the Fade Out Indicator remains
lighted.
After Fade-in, the Fade Out indicator and LED on the
Auto Fade Button go out.
V. *
*
▲
* 1
Note :
Auto-fade can be stopped by pressing the Auto
Fade Button (65).
The LED on the DSK Button (63) blinks while auto
fade is in the stopping process. Auto-fade starts
again when the Auto Fade Button (65) is pressed.
-24 -