Panasonic PV-4651 - Manual (Page 15)

Multi Function Display
VCFl/TV VCR CH
Up/Down
Selecting the Input Mode
1 Push MENU to display the menu.
2 Rotate and push the Wheel to select
“SET UP VCR.”
S Rotate the Wheel to select “INPUT
SELECT and then, push to choose
TUNER or LINE.
- You can also select “LINE” using the
VCR CH A/T buttons. The numbers
will change in the order shown.
MENU
cu
SET UP CHANNEL
ID lOMA/ LANGUE: ENGL I SH
SELECT
SET
END ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
.............. SET UP VCR
REPEAT PLAY ON
ON
LINE
SET AUDIO MODE
SELECT : ROTATE WHEEL
SET : PUSH WHEEL
END : PUSH MENU KEY
1 “
LINE*
1 —2 —3'
(CATV) (TV)
— 125 or 69
D
When LINE is selected, “L” is displayed in the
Multi Function Display for about 4 seconds.
Watching Another TV Program
1 Push VCR/TV while recording is in progress to turn off
the VCR indicator in the Multi Function Display.
2 Use the TV channel controls to select a program.
The VCR will continue to record your program while
you watch any channel you choose.
• Switch back and forth between the recording and viewing
channel with the VCR/TV selector.
Selecting Channels at the VCR
1 Turn TV on.
S. I ✓
-VCR-
Multi- Function
Display
If indicator doesn't light, push VCR/TV to turn it on.
2 Use VCR CH Up/ Down buttons to select channels
for viewing or recording.
• To resume TV control channel selection, push VCR/TV
to turn VCR indicator off, or simply turn VCR off.
Rapid Tune
Push R-TUNE to display the last
channel you were watching.
• When selecting channels with the VCR CH
Up/Down buttons, channels must be
displayed for at least 4 seconds in order for
the V(5
r to recognize them as a new
selection.
Previous Present
Channel Channel
CH08-*----- ►CHtO
15