Panasonic PV-4651 - Manual (Page 10)

One Time VCR Setup
When the VCR power is first turned on,
the language select and channel auto set
screen appear automatically followed by
a prompt to set the dock.
L\^^heck list before you begin.
□ Ail TV and VCR connections are made.
(See pages 6-9.)
To Set Language, Channel and Clock
___ Turn TV on and VCR on.
o
TV is set to VCR channel (the Same one you set on
the back of the VCR CH3 or CH4.)
(See page 6.)
POWER
VCFVTV VCR CH
Up/Down
or
0
!
or
VCR/TV
O
Push VCR CH A for
English on-screen
displays.
Push VCR CH ▼ for
Spanish on-screen
displays
Push VCR/TV for
French on-screen
displays.
SELECT «ÜAGE
PUSH VCR CH a : ENGLISH
PULSE VCFVCH T : ESPAÑOL
APP. VCR/TV : FRANÇAIS
If you set the wrong
language,
see the “Reset all VCR
Memory Functions"
section on page 5.
• You can also set by
using the same
buttons on the VCR.
This screen appears a few seconds later.-
• If you use a cable box, it must be left on
for auto channel set.
VCR
l
9
li
MENU
CHANNEL AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX, TUNE IT TO YOUR
LOCAL PBS CH THEN...
PLEASE PUSH CH UP KEY Push VCR CH A to ___________________
start Channel Auto Set.
• The following on-screen displays appear in sequence:
“CH AUTO SET COMPLETED"
“PLEASE SET CLOCK BY PUSHING MENU KEY”
Push MENU to display
the SET CLOCK screen.
Make entries within 5
minutes, or the VCR exits
the Set Clock screen.
I-M7 -- CLOCK..........................................
/ \ \ DST:ON
SELECT MONTH
BY ROTATING WHEEL
;PUSH WHEEL-»
TO END PUSH MENU KEY
Rotate and push the
WHEEL to select and
set the MONTH. - \ Í 7 - - SET CLOCK ..............................
DST:ON
ELECT MONTH
BY ROTATING WHEEL
:PUSH WHEEL-»
TO END PUSH MENU KEY
Using the Select/Set Wheel
There are basically two types of Wheel operation.
> Selecting items from an on-screen display.
> Entering information, such as setting the clock.
OPERATION
© Rotate
(up or down) ©(li
rotate TO SELECT
Push
(like a button)
ROTATE TO SELECT
to make selection to enter selection
10
MENU
Rotate and push the
WHEEL to set remaining
items at right.
• The day of the week
automatically appears.
• See page 5 for more on D.S.T.
Remaining items
to be set:
• Date
• Year
• Time
- D.S.T.
(Daylight Saving Time)
Push MENU twice
to start the clock
and exit this mode.
................ SET CLOCK --------------------
2/ 2/1996 FRi 1:30PM
DST:ON
SET COMPLETED
TO CORRECT
PUSH WHEEL OR CLEAR KEY
TO START PUSH MENU KEY