Panasonic PANAFAX UF-321 - Manual (Page 84)

tyòubl^HpÒting
Mode Symptom Action page
Vertical lines printing
on the received Printout a Journal report (e.g. FUNCTION, 6, 1 and SET) and
check quality to make sure if your machine has trouble or not.
73
document If Journal report quality is OK, your machine has no problem,
report to sending party that they have a problem.
If copy is NG, replace the Print Cartridge. 88
Print Copy Quality
Problems
Fuzzy print 1. Make sure you are using the correct paper for the best
possible print quality.
97
2. Try reversing the recording paper to the other side.
Missing dots or
lines/inconsistent 1. Make sure you are using the correct paper for the best
possible print quality.
97
darkness within print 2. Replace Print Cartridge. 15
Print Copy Quality
Fading print The Print Cartridge may be running out of ink. Replace Print
Cartridge. 15
Problems
Faint print You may need to choose a different paper for the best possible
print quality.
97
No diai tone 1. Check the connection of telephone line.
2. Check the telephone line.
94
No auto answer 1. Check the connection of telephone line. 94
2. Check Reception mode setting. 53
Communication
Problems
3. Check if machine is printing a report, (e.g.: 32 Transaction
Journal, Fax Parameter List).
If machine is printing a report, machine cannot receive until
printing is completed.
4. If the printed document is 32nd Transaction, machine will
usually print the 32 Transaction Journal automatically after
printing out the document. In this case, machine cannot
receive until the 32 Transaction Journal has been printed.
Cannot transmit or
receive
An information code will be shown on the display. Refer to the
information code table to find out the trouble.
84
No Unit Operation
No unit operation To reset the machine, turn-off the Power Switch for a few second
then turn-on again.
82