Panasonic PANAFAX UF-321 - Manual (Page 35)

Customizing Your Machine
Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the Parameter
Table, are preset for you and do not need to be changed. If you do want to make a change, read the table
carefully. Some parameters, such as the Resolution, Original, and Verification Stamp parameters, can be
temporarily changed by simple key operations just before a transmission is made. When the transmission ends,
however, these parameters return to their preset values (Home position). Other parameters can only be changed
by the procedure described below.
Setting Fax Parameters
1
2
FUNCTION I I _ 1
7
SET MODE (1-5)
ENTER NO-. OR A V
4
SET FAX PARAMETER(01-53)
NO.=|
3
Enter Fax Parameter number from the Parameter Table
(see pages 34 to 36).
Ex:[0][II for ORIGINAL
m SET
4
^
FAX PARAMETER(01-53}
NO.=01
01 ORIGINTUli
1¡NORMAL
Enter the new setting value.
Ex: [2] for LIGHT
01 ORIGINAL
2-.LIGHT
6
<9G I
To set another parameter, press I CLEAR I to return to
step 3, or, to return to standby, press I STOP I .
02 RESOLUTION
1:STANDARD
m
Note: 1. To scroll the Fax Parameters in Step 2 or 4, press 0 or 0 •
2. To print out a Fax Parameter List, see page 79.
3. The built-in battery when fully charged can back up the Fax Parameter settings for up to 10 days
when a power failure occurs.
33