Panasonic PANAFAX UF-321 - Manual (Page 36)

С^Шщшпд
Fax Parameter Table
MacITiñe
.♦ л.... ( -Ч'
No. Parameter
Setting
Number
Setting Comments
01 ORIGINAL 1 Normal Setting home position of the ORIGiNAL key.
2 Ught
3 Dark
02 RESOLUTION 1 Standard Setting home position of the RESOLUTION key.
2 Rne
3 S-Rne
04 STAMP 1 Off Setting home position of the STAMP key.
To select the stamp function when document is stored in memory
{see Fax Parameter No. 28).
2 On
05 MEMORY 1 Off Setting home position of the MEMORY key.
2 On
06 DIALING METHOD r Pulse Selecting dialling method.
2 Tone
07 HEADER PRINT 1 Inside Selecting printing position of the header.
Inside : Inside TX copy area.
Outside ; Outside TX copy area.
No print: Header is not printed.
2 Outside
3 No print
06 HEADER FORMAT 1 Logo, ID No. Selecting header format.
2 From To
09 RCV'DTIME PRINT 1 Invalid Selecting whether or not the machine prints received time, page
no, and remote ID on bottom of each received page.
2 Valid
10 KEY/BUZZER VOLUME 1 Off Selecting the volume of the Key/Buzzer tone.
2 Soft
3 Loud
12 COMM. JOURNAL 1 Off Selecting home position of printout mode for COMM. Journal
Off/Always/Inc. only
Off : No printout
Always : Always prints out
Inc. only; Printout when communication has failed.
2 Always
3 Inc. only
13 AUTO JOURNAL 1 Invalid Selecting whether or not the machine prints the journal
automatically after every 32 transaction.
2 Valid
15 ATTENDED MODE 1 Tel Selecting attended mode eitherTelephone Mode or Fax/Tel Auto
Switching Mode.
2 FaxTTel SW
16 UNATTENDED MODE 1 Fax Selecting attended mode either Fax Mode or TAM Interface
Mode.
2 TAM l/F
Continued on the next page.
34