Customizing your machine – Panasonic PANAFAX UF-321 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Customizing Your Machine
No.
Parameter
Setting
Number
Setting
Comments
18
OP CALL TIMER
1
20 sec.
Selecting the length of time that your machine signal (rings) for
an incoming voice call in FaxTTel Auto Switching mode (see page
55).
2
30 sec.
3
40 sec.
4
50 sec.
19
OGM Length (TAM !/F)
1
1 sec.
Setting the OGM length of your TAM from 1 to 60 second. Unit will
not start to detect a SILENT until the time lapse after detecting a
call in TAM Interface mode.
—
—
60
60 sec.
20
SILENT DET. (TAM l/F)
1
Invalid
Selecting Silent Detection Mode.
2
Valid
22
SUBSTITUTE RCV
1
Invalid
Selecting whether or not the machine receives to memory when
recording paper runs out, ink runsout or recording paperjammed.
2
Valid
23
RECORDING PAPER
SIZE
1
A4
Setting the recording paper size installed in your machine.
2
Letter
3
Legal
24
PRINT REDUCTION
1
Fixed
Selecting print reduction mode.
Fixed: Reduce document according to setting of Parameter No.
25.
Auto: Reduce document according to the length of received
documents.
2
Auto
25
REDUCTION RATIO
70
70%
Selecting fixed print reduction ratio from 70% to 100%. This
parameter functions when fixed print reduction is selected on fax
parameter no. 24 or when available memory getting low.
...
...
100
100%
26
POLLING PASSWORD
{....)
Setting a 4-diglt password for secured polling.
28
STAMP AT MEM. TX
1
Invalid
Selecting whether or not the machine stamps the original
documents when storing the documents into memory.
2
Valid
32
COPY REDUCTION
1
Invalid
Selecting whether or not the machine performs copy reduction in
accordance with the setting of Parameter No. 24 and 25.
2
Valid
46
SELECT RCV
1
Invalid
Selecting whether or not the machine performs selective
reception, (see page 71)
2
Valid
47
REMOTE RCV
1
Invalid
Selecting whether or not the machine accepts remote reception
command (see page 54).
2
Valid
48
TELEPHONE LINE
1
PSTN
Selecting the type of line connected.
2
PBX
49
PSTN ACCESS CODE
0—
Setting PSTN Access Code. (max. 4 digits)
50
FLASH KEY
1
Earth
Selecting to use FLASH on control pane! either as Earth key or
2
Rash
%
Continued on the next page.
35