Setting the telephone mode, Operation of telephone mode, R^^lymg [^curwb^ti – Panasonic PANAFAX UF-321 User Manual

Page 56: Telephone mode

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

R^^lymg [^curWb^ti

Telephone Mode

When your machine is set to this mode, your machine wili not receive documents automatically, if you receive
a fax call, follow the procedure to receive documents manually.

Setting the Telephone Mode

Change Fax Parameter No. 15 (ATTENDED MODE) to 1 : Tel. (see page 34)

o [;

nCV MODE

Confirm that the lamp is OFF and the display as shown to
the right.

08-DEC-1993 15:00

RCV MODE=TEL 00%

Operation of Telephone Mode

When your telephone rings, lift the fax handset or an extension phone.

¡Tf you hear a beep from the phone, it means someone wants to send a fax. Or, if the caller |

|_answers and says he/she wants to send a fax, then^^^___

Remove the document from ADF, if any.

|lf you answered the call using th^ |
|_fax handset, (See Note 1)___ _|

O START

Hang up the phone.

I If you answered the call on an |

l_extension phone,

n a

within

second

from the extension
phone, (see Note 2)

Your machine will be activated

remotely.

ffl

Note:

1. If your machine does not have the handset, follow the step 3b.

2. This procedure is called "REMOTE RCV" and will work on a touch tone phone. If your extension

phone is not touch tone phone, press

START

on the control panel of your fax machine.