Panasonic CQ-VX777EW - Manual (Page 13)

SBC (Super Bass Control)
X' Press SELECT to select SBC mode,
il) • Press* to set SBC.
The SBC types change as shown below each time is
pressed.
SBC OFF SBC TYPE 1
T i
SBC TYPE 3 SBC TYPE 2
(The direction of change will be reversed if is pressed.)
Press select SBC-SW. (In this case, the rear speaker
will be in monaural mode.)
The SWC frequencies change as shown below each time
is pressed.
SBC-SW 100Hz ^ SBC-SW 150Hz SBC-SW 200Hz
1 i
SBC-SW OFF
(The direction of change will be reversed if is pressed.)
The SBC function reinforces the bass range to suit the speaker characteristics. It is set to the rear speaker
output, and permits selection of any of the three positions depending on the type of speakers installed.
(See the tables below.) These characteristics are so set as to be best suited particularly to the
recommended speakers, but are subject to change in acoustic effects depending on the type of car and the
position of speaker installation. Referring to the characteristics of each type of speaker, set SBC as suited
to the characteristics of the type of speakers used. In case of the SBC-SW type, the system can be
upgraded by connecting a desired subwoofer to the special subwoofer output to create a front-oriented
sound.
SBC Display Speaker Assumed
SBC TYPE1
Semi-flush mounted speaker
SBC TYPE2
SBC TYPES Flush mounted speaker
SBC-SW Display Bass Cutoff Frequency
SBC-SW 100Hz 100Hz
SBC-SW 150Hz 150Hz
SBC-SW 200Hz 200Hz
13
CQ-VX777EW