Technical specifications, Cehtrsli; p.b. box, Osaka – Panasonic SAGX690 User Manual
Page 24: Japan, Aììkimlìm, Miat^ushi^ pectric industrial co., ltd
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
--t-*
‘■,11».
I'jjf »'I-.'ll;-
Technical specifications
'
''*■
'
'
'
*1*^* ''i* "'irf
aÌìkimlìm
c
- '..',, •, ■," ■
"•'. •
'
i >•■'<■'’■ r '-'■ .
. -'
: •’ ,
"
i
,
/,,
.'i' '. '
.
^ ■
:■
m
AMPLIFIER SECTION
Power output (at 240 V)
DIN 1 kHz(T.H.D-1%)
(For United Kingdom)
[SA-GX690] 2x100 W (4 C)
[SA-GX390] 2 X 50 W (4 O)
(For Australia and N.Z.)
[SA-GX690]2x100 W{8 O)
[SA-GX490]2xl00 W(8n)
[SA-GX390] 2 X 60 W (8 n)
20 Hz-20 kHz continuous power
output both channels driven
(For United Kingdom)
[SA-GX690] 2 X 65 W (8 O)
(For Australia and N.Z.)
[SA-GX690]2x90W(8 0)
[SA-GX490]2
x
80 W(8 Q)
40 Hz-20 kHz continuous power
output both channels driven
(For United Kingdom)
[SA-GX390]2x30W(8 0)
(For Australia and N.Z.)
[SA-GX390] 2 X 40 W (8 Q)
Total harmonic distortion
rated power at 20 Hz-20 kHz
[SA-GX690/SA-GX49010.05% (8 Q)
rated power at 40 Hz-20 kHz
[SA-GX390] 0.5% (8 Q)
half power at 1 kHz
0.03% (8
Cl)
Power output at the Dolby Pro Logic
operation
DIN 1 kHzCr.H.D. 1%)
Front (For United Kingdom)
[SA-GX690] 2 X 60 W (4 O)
[SA'GX390] 2 X 40 W (4 n)
(For Australia and N.Z.)
[SA-GX690]2
x
70 W{8C)
[SA-GX490] 2 x 55 W {8 n)
[SA-GX390]2
x
40W(8 O)
Center (For United Kingdom)
[SA-GX690] 60 W (8 O)
[SA’GX390] 40 W (8 Q)
(For Australia and N.Z.)
[SA-GX690] 70 W (8 O)
tSA-GX490] 55 W (8
Cl)
[SA-GX390] 40 W (8 Q)
Surround (For United Kingdom)
[SA-GX690] 60 W (8
Cl)
[SA-GX390] 40 W (8 O)
(For Australia and N.Z.)
[SA-GX690] 70 W (8 O)
[SA-GX490] 55 W (8 O)
[SA-GX390] 40 W (8 O)
Intermodulatlon distortion
rated power at 60 Hz: 7 kHz-4:1,
SMPTE
0.5% (8
Cl)
Power bandwidth
both channels driven, -3 dB
10 Hz-40 kHz (8 0
Damping factor
30 (8 C)
Input sensitivity and Impedance
PHONO
3 mV/47 kQ
CD, VCR 1, VCR 2/VlDEO CD, TAPE
200 mV/22 kCi
S/N at rated power (8 Q)
PHONO
70dB{IHF, A:80dB)
CD, VCR 1, VCR 2/VlDEO CD, TAPE
75 dB (IHF, A: 88 dB)
Frequency response
PHONO
RIAA standard curve
(30 Hz-15 kHz) ±0.8 dB
CD, VCR 1, VCR 2/ViDEO CD, TAPE
10 Hz-40 kHz. ±3 dB
Tone controls
BASS
50 Hz,
+
10 to -10 dB
TREBLE
20 kHz, +10 to -10 dB
Loudness control (volume at -30 dB)
[SA-GX690 only]
50 Hz. +9 dB
Output voltage
VCR 1 OUT, TAPE REC (OUT)
200 mV
Channel balance (250 Hz-6.3 kHz)
±1 dB
Channel separation
55 dB
Headphones output level and
Impedance
430 mV/330 Q
Load Impedance
Front
[SA'GX690/SA-GX490|
A or B (For United Kingdom) 4-16 0
(For Australia and N.Z.)
8-160
A and B
8-16 O
[SA-GX3901
(For United Kingdom)
4-160
(For Australia and NX)
8-160
Center
8-16 0
Surround
4-16 0
■ FM TUNER SECTION
Frequency range
87.50-108.00 MHz
Sensitivity
S/N30d8
1.5pV/75fl
S/N26dB
1.3pV/75D
S/N 20 dB
1.2 pV/75 0
IHF usable sensitivity
(IHF ’58) 1.5 pV/75 0
IHF 46 dB stereo quieting sensitivity
22
m
V/75 O
Total harmonic distortion
MONO
0
.
2
%
STEREO
0.3%
S/N
MONO
60 dB (75 dB, IHF)
STEREO
58dB(71 dB, IHF)
Frequency response
20 Hz-15 kHz, +1 dB, -2 dB
Alternate channel selectivity
±400
kHz
65 dB
Capture ratio
1 dB
Image rejection at 98 MHz
40 dB
IF rejection at 98 MHz
70 dB
Spurious response rejection at 98 MHz
70 dB
AM suppression
50 dB
Stereo separation
1 kHz
40 dB
Carrier leak
19 kHz
-30 dB (-35 dB, IHF)
38 kHz
-50dB(-55dB, IHF)
Channel batance (250 Hz-6.3 kHz)
±1.5 dB
Limiting point
1.2 pV
Bandwidth
IF amplifier
180 kHz
FM demodulator
1000 kHz
Antenna terminal(s)
75 Q (unbalanced)
■ AM TUNER SECTION
Frequency range
MW (AM)
522-1611 kHz (9 kHz steps)
530-1620 kHz (10 kHz steps)
LW (For United Kingdom only)
144-288 kHz
Sensitivity
MW (AM)
20 pV, 330 pV/m
LW (For United Kingdom only)
45 pV
Selectivity
MW (AM) (at
999
kHz)
55 dB
LW (For United Kingdom only)
(at 252 kHz)
55 dB
Image rejection
MW (AM) (at
999
kHz)
40 dB
LW (For United Kingdom only)
(at
252
kHz)
40 dB
IF rejection
MW (AM) (at
999
kHz)
55 dB
LW (For United Kingdom only)
(at 252 kHz)
55 dB
■ VIDEO SECTION
Output voltage at 1 V Input (unbalanced)
1 ±0.1 Vp-p
Maximum input voltage
1.5 Vp-p
Input/output impedance
75 O (unbalanced)
■ GENERAL
Power consumption
(For United Kingdom)
[SA-GX690] 235 W
[SA-GX390] 220 W
(For Australia and N.Z.)
[SA-GX690] 225 W
[SA-GX490] 200 W
[SA-GX390] 190 W
Power supply
AC 60/60 Hz, 230-240 V
Dimensions (W
x
H
x
D)
[SA-GX690] 430 X
158
X 352 mm
[SA-GX490/SA-GX390]
430x136x352 mm
Weight
[SA-GX690] 9.8 kg
tSA-GX490] 9.2 kg
[SA-GX3901 7.8 kg
Notes:
1. Specifications are subject to change
without notice.
Weight and dimensions are approximate.
2. Total harmonic distortion is measured by
the digital spectrum analyzer.
For United Kingdom only
This apparatus was produced to BS 800.
Miat^ushi^ pectric Industrial Co., Ltd.
CehtrsLi; P.b. Box
288
, Osaka
530
-
91
, Japan
Printed in japan
RQT
3013
-B
H039500