Panasonic RAMSA WP-1200B/G - Manual

Rated Power Output 120 W + 120 W / 8 Ω, 20 Hz ~ 20 kHz, less than 0.3 % THD
200 W + 200 W / 4 Ω, 40 Hz ~ 20 kHz, less than 0.3 % THD
Bridged Output 400 W / 8 Ω, 20 Hz ~ 20 kHz
Frequency Response 20 Hz ~ 20 kHz, +0 dB, –0.5 dB at 4 Ω, 1 W output
Total Harmonic Distortion Less than 0.3 %, 40 Hz ~ 20 kHz
(4 Ω Load) Less than 0.1 %, 1 kHz
IM Distortion (SMPTE, CCIF, DIM100) Less than 0.3 %
Crosstalk –60 dB or less (at 20 kHz)
Voltage Gain 27.2 dB at 1 kHz
Input Sensitivity +4 dB at rated output / 4 Ω
Input Impedance 40 k Ω
Input C.M.R.R. Greater than 40 dB at 1 kHz
Damping Factor Greater than 100 dB at 1 kHz, 8 Ω load
SN Ratio (DIN) Greater than 100 dB below 8 Ω rated
Source Voltage/Frequency 220 ~ 240 V AC (50 Hz) (G)
Switches and Controls Power switch, Input Sensitivity Potentiometer
Stereo/Mono/BTL selector
LED Power indicator, Peak indicator, Protection indicator
Connectors & Terminals Input Connectors: famale XLR half lock type x 2
TRS phone jack x 2
Dimensions 480 (W) x 88 (H) x 393 (D) mm
Weight (approx.) 11.8 kg
P O W E R A M P L I F I E R S
Dimensions
Power Amplifier (200W+200W)
WP-1200B/G
• Rated Power Output 200 W+200 W (4 Ω), 120 W+120 W (8 Ω)
• Switching possible between stereo, mono and BTL modes.
• Newly developed servo control system with superior radiation capability.
• VI limiter and Crow-Bar circuit used to prevent trouble from occurring.
• Class H circuitry improves output efficiency.
• Simple and rational circuit design ensures stable operation.
• Highly balanced design ensures reliability, durability and tone quality.
SPECIFICATIONS
420
480
480
34
350
10
14 88
88
Unit: mm
Front Panel
Rear Panel
PUBLIC ADDRESS
RAMSA
Peak level indicator (A)
Power ON/OFF switch
Power ON indicator
Protect indicator (B) Input level
control (B)
Peak level indicator (B) Protect indicator (A)
Input level
control (A)
Input connectors
Ground terminal
AC power
cord
Rear panel
protection
angle
Output terminals
Mode selector
(Stereo/Mono/BTL)