Speaker impedance, For your reference – Panasonic SAGX690 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

■V' X.-' '
r
y- _.y~.
Connection of surround speakers
For SA-GX690/GX490
Right speaker
(not included)
Left speaker
(not included)
Connection of center speaker
BEO
Before sound can be heard, the SURROUND mode or 3 STEREO
mode (of the Doiby Pro Logic system) must be on.
For SA-GX690/GX490
Center speaker
(not included)
For SA.GX390
Center speaker
(not included)
Speaker cabie
(not included)
This unit
Speaker cabie
(not inciuded)
For SA-GX390
■ speaker impedance
The impedance of any speaker used with this unit must be 8—16 Q.
Connection of subwoofer
SA-GX690 only
Right speaker
(not included)
Left speaker
(not included)
1. Before sound can be heard, both surround speakers must be
connected.
2. Do not connect the surround speakers to the front speaker ter
minals. The surround speakers may be damaged if connected
to the front terminais due to the output power difference bet
ween the front and surround terminals.
■ Speaker impedance
The Impedance of any speaker used with this unit must be 4 -16 Q.
The subwoofer is connected when bass sounds are inadequately
reproduced because front speakers are too small.
When connected, the subwoofer can be placed in any position.
This unit has no amplifier section designed especially for the sub
woofer, so it is necessary to purchase a subwoofer with a built In
amplifier or buy the two separately.
Subwoofer with built-in
amplifier (not included)
Stereo connection cabie
(not included)
This unit
TI
Connecting a subwoofer which does not have
a built-in amplifier
Connect an optional amplifier to the "SUBWOOFER’' terminals of
this unit and then connect a subwoofer to the speaker terminals
of the amplifier.
For your reference:
The level of sound output from the subwoofer will always be at
80 Hz or less, regardless of the settings of the speaker select but
tons on this unit, thus the intensity of the tow frequency range will
be maintained.
When adjusting the volume of the subwoofer
After setting the volume control on the subwoofer or on the
amplifier which is connected to the subwoofer, make any further
adjustments with the volume control on this unit.
11