Panasonic SAGX690 - Manual (Page 22)

Making a recording
About tile HELP ñmction
Recording on the VCR (VCR 1)
Recording from an audio source
Recording from the tape deck is not possible.
\E
Begin recording on the VCR
1.
Follow your VCR’s operating instruc­
tions.
If you make a mistake in operation or if sound output stops due to
some operation which was performed, the HELP function
dispiays information which can be useful for indicating the
method by which this condition can be remedied.
If “ERROR" or scrolling characters (for instance, "TAPE
MONITOR ON NOW”) appears on the display during operation,
carry out the following operation.
- HELP
o
-RESET
-HELP Press -HELP. (Touch only.)
The method for remedying this situation will be
displayed.
For your reference
If the above button is pressed for 2 second or more until
"RESET” appears on the display, the operation settings for the
unit will be initialized to the settings made at the time of ship­
ment.
However, any broadcasting stations which have been preset Into
memory will not be erased at this time.
@7 Begin the audio source to be
recorded.
Precautions in recording a audio source
If not recording the picture from VCR2 or a video CD player,
either turn the unit OFF or select VCR1.
The unit is set such that video signals input at video input ter­
minals "VCR2” and "VIDEO CD” are output from the “VCR1" vi­
deo output terminal on the back of the stereo.
Therefore, when recording an audio source. If the VCR2 source
or video CD player is playing, the picture will be recorded through
VCR1.