Panasonic SAGX690 User Manual
Technics
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- SA-GX690
- SA-GX490/SA-GX390
- Caution for AC mains iead
- CAUTION!
- IMPORTANT
- Before use
- How to replace the fuse
- “REMOTE CONTROL OUT” terminal
- To connect a video deck with 2t pin scart terminal
- (For Australia and N.Z.)
- M How to use the antenna plug (Included)
- To connect a 75*ohms coaxial cable-
- When mounting the antenna to a column, a wall or rack
- ■ Speaker impedance
- ■ speaker impedance
- For your reference:
- Press SPEAKERS and check the “ON” Indication lights up.
- V|^[\,., |Press to select the desired source.
- \U
- Start the desired source.
- Turn VOLUME to adjust the volume level.
- When the tape monitor indicator Is lit or flashing
- Press MUTING.
- Press -MUTING- (Touch only.)
- Turn BALANCE to adjust the ^ ^ left/right sound balance.
- -LOUDNESS until “LOUDNESS” lights up.
- Use VOLUME to reduce the volume level, and connect the headphones.
- Press TUNER.
- DIRECT TONINO Press DIRECT TUNÌnG.
- 11 [213 i\q~ol^Press the appropriate numeric buttons to enter the frequency.
- Press TUNER.
- BAND Press BAND to select “FM”, 1 “MW”or“LW”.
- Press vor A to tune to the I desired broadcast.
- When the FM stereo broadcast is received
- If noise Is excessive In the FM stereo mode
- To change the MW frequency step
- S7
- 57
- 17'
- 57
- @7