beautypg.com

Using the control panel – Panasonic KX-P2023 User Manual

Page 36

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Using the Control Panel

Resetting All Current Settings to the Factory Settings

Follow the instructions below:
If there is paper loaded, you will automatically get a printout of the current settings.

2.

(D

While pressing ( LOAD/PARK], turn
the power on, then release.

Make sure that both FONT indicators are
blinking.

O

Q.
(D

Press ( TEAR OFF ).

All the current settings will be reset to the

Factory settings.

NLINE

TEAR

OFF

LF/FF

LOAD 1

1

/ /

Press ( LOAD/PARK).

A printout will verify the current setting.
You have exited the Initial Setup Mode.

36

See also other documents in the category Panasonic Printers: