Panasonic DVD-RV41 - Manual (Page 28)

Connecting an analog amplifier or
system component Connecting a digital amplifier or
system component
DVD-RV41 lOyOsRVa'ti
® Back of the unit
DVD-RV41 I0VDW31
@ Back of the unit
E
Connecting an active subwoofer (optional)
mm
You can enjoy more powerful bass by connecting an active subwoofer.
(h) To the subwoofer’s
input terminal
• Place the subwoofer as close as possible to the front cent­
er.
•Turn BASS PLUS on to boost the output from the subwoofer
page 14).
•Adjust the volume on the subwoofer to suit your preference.
Recording to MDs or cassette tapes
DVD-RV41 I DVD-RV31
■ Analog recording
You can record to an MD or cassette tape, Using analog connection
means sound will be unaffected by the copy guards found on DVDs.
To make an analog recording
1. Connect the recording equipment with an audio cable Q
above).
2. Set “Speaker Setting” to “2-channel” page 22). ■■ atjijwjui
(If this is set to “Multi-channel", only the audio for the front 2
speakers will be recorded.)
RQT5869
■ Digital recording
You can record the digital signal directly onto an MD.
The signals on DVDs will be converted to 48 kHz/16 bit linear PCM.
Ensure the following conditions are met.
•There is no copy guard recorded on the disc.
•The recording equipment can handle a sampling frequency of
48 kHz/16 bit.
To make a digital recording
1. Connect the recording equipment with an optical digital audio
cable (-► □ above).
2. When recording DVDs, change the digital audio output settings
page 25).
PCM Down Conversion: Yes
Dolby Digital: PCM
DTS Digital Surround: Off
MPEG^: PCM
^Only DVD-RV41 for all regions and DVD-RV31 for the United
Kingdom, Continental Europe, Australia and N.Z.