Panasonic DVD-RV41 - Manual (Page 27)

i;a-:i^
\
Connecting an amplifier with 5.1
channel audio input terminals Connecting an amplifier with a built-
in decoder or a decoder-amplifier
combination
© Audio cable
©White (L)
© R e d (R)
DVD-R V41 IDVDrRV31
© Back of the unit © Back of the unit
You can enjoy surround sound by connecting from
three to six speakers.
Example: Six speakers
•Select “Multi-channel” and adjust the settings to suit the
speakers you have connected page 24).
•Select “No” in “PCM Down Conversion” page 25).
Adjust the settings to suit the equipment you have con­
nected page 25).
•Turn Advanced Surround off page 14) if you have connected a
center speaker, surround speakers or a subwoofer, as weii as the
front speakers. Sound will not come from the other speakers if
Advanced Surround is on.
• Use the connection described in Q at right to enjoy DVDs encod­
ed with DTS.
• If you do not connect a subwoofer, it is advisable to connect front
speakers (L/R) capable of producing bass of less than 100 Hz.
You cannot use DTS Digital Surround decoders not suited to DVD.
RQT5869