Panasonic PV-4611 - Manual (Page 17)

Cancel a Timer Recording:
Recording js in progress
1 Push the VCR POWER button to
release the VCR from timer mode.
2 Push the STOP button within 10
seconds of pushing the VCR POWER
button to cancel the recording.
The TIMER indicator goes out in the
Multi- Function display.
P DT STRAT STOP CH SPO
3 10
4 SU
8:00P 9:00P 10 SP
9:OOP10;OOP L SLP
Replace Program Contents:
Recording is not in progress
Push the PROG
button to display all
currently set
programs.
Rotate and push the
Wheel to select and
enter the desired timer
recording.
(See page 16.)
Rotate and push the
Wheel to select and
enter replacement
information.
SELECT 1-B ¡ROTATE WHEEL
ENTER ¡PUSH WHEEL
CANCEL ¡PUSH CLEAR KEY
END ¡PUSH PflOQ KEY
DATE I . START STOP CH
8SAT10:00P12:00P125
if'""________
BY ROTATING WHEEL
ELECT START DATE
♦PUSH CLEAR ¡ PUSH WHEEL-*
TO END PUSH PROQ KEY
Push the PROG button to exit this mode
and return to the normal TV screen.
Review or Clear Program Contents;
Recording is not in progress
Push the PROG
button to display all
currently set
programs.
Rotate the Wheel to
select the desired
program number.
Push the CLEAR
button to clear the
program.
P DT STHAT STOP CH SPD
2 8 10¡00P12:0CP1г5 SLP
3 10 8;00P 9¡OOP 10 SP
4 SU 9¡OOP10:OOP L SLP
SELECT 1-8¡ROTATE WHEEL
ENTER ¡PUSH WHEEL
CANCEL ¡PUSH CLEAR KEY
END ¡PUSH PROG KEY
P DT STRAT STOP CH SPD
0
—
OOP12:OOP1Z5 SLP
OOP 9¡OOP 10 SP
OOPIOlOOP L SLP
2 8 10
3
10 8
4 SU 9
SELECT 1-8¡ROTATE WHEEL
ENTER ¡PUSH WHEEL
¡PUSH PROG KEY
Push the PROG button to exit this mode
and return to the normal TV screen.
Timer Recording
Using VCR Buttons
A timer recording can be set up using the buttons on the
VCR. If necessary, the clock can also be set.
▼SELECTA
Hold down
REC/TIME.
SET PROGRAM
START STOP CH
SXir^ SLP
and
©
Push FF to
enter the
program mode.
NEXT, PUSH SET KEY OR
TO END PUSH PROG KEY
SET CLOCK..................................
1/-/ —-
DST¡ON
If the clock is not set, pushing these
buttons will display the SET CLOCK
screen. In this case, proceed with steps
2 and 3 to set the clock and then steps
2~6 to set a timer recording.
Once the VCR is in the Program mode, the PLAY, RFC, FF,
and REW buttons on the VCR operate only as specified above.
SELECT MONTH
BY SELECT i/T KEY
NEXT, PUSH SET KEY OR
TO END PUSH PROG KEY
0 0 1 - C - )
(for down) (for up)
Push REW or PLAY to
make your selection.
0
Push FF to set
and move on to
the next item.
Push SET (FF) repeatedly to move to a
particular item for setting or correction.
Items to be Set:
• recording DATE
• START time
• STOP time
•CH(annei), or LINE
• SPEED (SP, LP, SLP)
When the program is completed...
and
Push REC/TIME
and FF to display
program contents.
(at the same time)
To set the next program,
repeat steps 2, 3, and 4 before continuing with step 5.
and
0
Push REC/TIME and
FF to exit this mode.
(at the same time)
Push POWER off
to set the timer.
-¡¡Esa-
^ I
Multi Function Display
It is not possible to clear a timer program using the VCR buttons.
Please use the Remote Control.
When recording programs via a cable box, make sure the cable
box is left on and tuned to the desired channel.
17