Panasonic PV-4611 - Manual (Page 15)

Record On a Tape
Check list before you begin.
H All connections are made.
(See pages 6-9.)
□ VCR is Plugged in.
□ TV is turned on and set to the VCR
channel (CH3 or CH4).
Insert a cassette with record tab
VCR power comes on automatically.
Push VCR CH A/T or
NUMBERED keys to
select a channel.
• Or, push CH A/T on the VCR.
• To record from an outside
source, push VCR CH A/Y to
select “LINE" {see page 18).
(Di
SPEED o
Push SPEED to change
current recording speed.
• SP = Standard Play, LP = Long
Play, SLP = Super Long Play.
REC/TIME
Push REC/TIME
to start recording.
• Or, push PLAY and REC/TIME on the VCR.
f
One Touch Timer Recording (OTR)
The VCR starts recording and turns itself off
at a preset time.
Continue to push REC/TIME to set /♦Normal Rec-M):30-
the recording length. Each Push will
change the stop time as shown.
* "TIMER” lights in the Multi Function Display.
c
4iH)4-3:00^2DO-<-1:30 l:30v^
Push STOP to
stop recording.
• Or, push STOP/EJECT on the VCR.
Watching Another TV Program
1
Push VCR/TV while recording is
in progress to turn off the VCR
indicator in the Multi Function
Display.
2 Use the TV channel controls to
select a program. The VCR
will continue to record your
program while you watch any
channel you choose.
• Switch back and forth between
the recording and viewing
channel with the VCR/TV
selector.
Selecting Channels at the VCR
1
Turn TV on.
N y
- V C R -
N.
Multi- Function
Display
If indicator doesn't light,
push VCR/TV to turn it on.
Use VCR CH A/V
buttons to select channels
for viewing or recording.
To resume TV control channel
selection, push VCR/TV
to turn VCR indicator off, or simply
turn VCR off.
Rapid Tune
Push R-TUNE to display the last
channel you were watching.
Previous Present
Channel Channel
CH08----------►CHIO
When selecting channels with the
VCR CH
A/T buttons, channels
must be displayed for at least 4
seconds in order for the VCR to
recognize them as a new selection.
Holding down the VCR CH A/V buttons will increase the channel search speed.
Push PAUSE to pause a recording in progress.
The recording time remaining appears if the DISPLAY button is pushed during OTR mode.
After the VCR has been in Pause mode for 5 minutes, it will stop automatically to protect the tape and video head.
15