Panasonic KX-RC95 - Manual (Page 59)

Message Description
END OF BLOCK ..............................Do you want to delete a block of records?
DELETE RECORDS NA'?
END OF LINK................................. Sending or receiving is done.
PRESS ANY KEY
END OF TRANSACTION ................This line is the end of the transaction.
[ERROR].......................................... Error has occurred during calculating,
* ERROR * ................................. Will be displayed if consecutive payments
BALANCE OVERFLOW or deposits exceed 99,999.99.
ERROR ADDRESS TOO LARGE . . . . Memory became full while receiving
PRESS ANY KEY
address data.
ERROR CARD TOO LARGE........... Memory became full while receiving card
PRESS ANY KEY data.
ERROR CHECK TOO LARGE ....... Memory became full while receiving check
PRESS ANY KEY data.
EXISTING DATA SHOULD BE........This action deletes existing data. Are you
DELETED CONTINUE NA^ ? sure?
INSERT AC ADAPTOR.................. Insert AC adaptor and recharge the Ni-Cd
THEN PRESS ANY KEY battery. (See p. 11)
^ INVALID PASSWORD ^ .............. Invalid password was entered.
^ LINK CANCELED .........................Sending or receiving is canceled.
LINK ERROR !................................ Error has occurred while sending or
PRESS ANY KEY receiving data. (See p. 49)
LOCATIONS SELECTED ............... Do you want to print a demo?
PRINT DEMO NA'?
[MEMORY] ...................................... Data is stored in memory.
MEMORY ERROR !......................... Data in memory is damaged.
PRESS ANY KEY (See “Troubleshooting Guide" on p. 51)
* NO CARD RECORDS *................. There are no card records in memory.
^ NO CHECK RECORDS * .............There are no check records in this account.
List of Display Messages
>
■o
■o
3
Q.
X
O (A
(A
^ O
(b ^
a
59