Connections/ initial setup (ready to play), Connections / initial setup (ready to play) , 9, Connections/ initial setup – Panasonic PV C1322 User Manual

Page 8: Ready to play)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Connections/ Initial Setup

(Ready to Play)

Please make all cable or antenna connections before powering on.

Connecting

For ANT./Cable
Connect the cable from

Antenna/Cable to the VHF/UHF
terminal on the unit.

For DSS/Cable Box

Connect the OUT jack on your
cable box to the VHF/UHF
terminal on the unit with a RF
cable.

WARNING:

Overtightening "Nut type" RF coaxial cables

may damage jacks. Finger tighten only.

Initial Setup (Ready to Play)

Plug the unit power cord into an

AC wall outlet.

Press Power on the remote or

unit. The unit comes on and auto

channel and clock set starts.

CH AUTO SET PROCEEDING

IN from

ANT./CABLE

VHF/UHF

UNIT

Settings are made

automatically. When setup is
done, this screen appears.

2/6/2002 WED 12:00PM

DSTiON

SETTING : CH 10

AUTO CLOCK SET

COMPLETED

If you use a cable box, turn it on and set it to the
Public Broadcasting Service {PBS) channel in

your time zone. If you use a DSS reciever, it
must be turned off.

If AUTO CLOCK SET IS
INCOMPLETE screen

appears, set the clock using

MANUALCLOCKSET
procedure as below.

AUTO CLOCK SET

PROCEEDING

CANCEL : PRESS STOP KEY

SET CLOCK

2/ 6/2002 WED 12;0

DST:0N

SET COMPLETED

SET

START

: ACT I ON

For assistance, please call: 1-800-211-PANA(7262) orsendemail to: consumerproducts® panasonic.com