Tape operation, Press search, Press fforrew – Panasonic PV C1322 User Manual

Page 24: Press ff to, Search system is, Index search, Program end search

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Tape Operation

Search System is...

Each time a recording is made, an invisible index mark is placed on the tape.

When timer recordings are made, program index and information are also included.
These index marks can be used to access or scan recordings.

Index Search

Go directly to the desired recording.

mOEX SEARCH

ENTER INDEX NUMBEHil

USING 1-9 KEYS

FWWARD SEARCH:FF

REVERSE SEARCH:REW

NEXT:SEARCH

EXIT:STOP

Press SEARCH*

in Playback or
Stop mode to
display INDEX

SEARCH screen,

and then

press

NUMBER Keysto

select the

recording number.

• To calculate number,

see below.

Press FForREW

to start search.

INDEX SEARCH

FORWARD SEARCHiFF
REVERSE SEARCH :REW

Play begins at

search end. To
search forward or

back 1 index,

press FForREW

while screen left in
displayed (10 sec.).

■ To calculate the Index Number

Example 1:

To go to rec. 2 from rec. 4, enter 3 and press REW.

Program End Search

Locates end point of recording for continuity.

Press SEARCH

twice in Playback

or Stop mode to display

PROGRAM END SEARCH screen

PROGRAM END SEARCH

SEARCH START:FF

EXIT: SEARCH

Press FF to

start search.

Example of Program End Search operation.

Fia.1____________ PLAYBACK DIRECTION ------

Press SEARCH button ' ^Hnd Point I

* FF

Fip.2 _______________ ___________

ill « BLANK I [111 I Program 2 ||| BLANKED

Press SEARCH button

End Point

Fig.3 tf search exceeds a few seconds in BLANK area

||PrDgratnlj j

BLANK 11^11 Program: |

i___

lEnd Point 1

Example 2:

To go to rec. 6 from rec. 2, enter 4 and press FF.

NOTE: f indicates start points of each recording.

Upon locating end point...

The unit searches slightly past end point,

reverse searches, and plays the last few

seconds of the program, then stops.

irr Program 1 (BLANK) | jj Program 2 (BLANK) ||

Press SEARCH button

j REVERSE

PLAY:

j SEARCH

425^

• Make each entry within 10 seconds, or the Index

Search mode will be canceled.

• If Index Search is started very close to an index

mark, that index mark may not be counted in the
search.

• If Program End Search is started very

close to an index mark, that mark may be
skipped over.

• To cancel, press PLAY or STOP.

For assistance, please call; 1-800-211-PANA(7262) or send e^тíail to : [email protected]