Panasonic PV C1322 - Manual (Page 22)

imer Recording
You can set up to 8 programs to be recorded while
you are away.
1
Press PROG to display SET PROGRAM
screen.
TIMEfl PFOGRWMNG
SEL£CT:* ▼
SET :►
END :PFOQ
1) Press
AT
to select
TIMER
PROGRAMMING.
2) Press ► to display
screen.
• If a program is already in
memory, press AT, and
^ to select an unused
program number.
Press
AT
to select
and ► or to set the
recording DATE.
• 1-31 = One time
• DAILY = MON-FRI
• WEEKLY SUN-SAT
= Same time once a week
■31— 1 —2
Bamule ,
Today’s------ 7 SELECTA/T Selection Order DAILY
Date I WEEKLY WEEKLY WEEKLY
_J
(SAT) " (MON) (SUN)
Repeat step 3 to set:
• start time, stop time
• Channel (or LINE for outside source)
• Speed (SP, LP, SLP)
P DT START CH SPD
E K B
CAMCELrADOyOLT
SELECT 1-fl:* *
ENTER ;►
END :PROG/ACTION
Press PROG (or
ACTION) to end the
program.
To Enter More Programs,
press
AT
to select
and ► to set a blank
program number, and
then repeat step 3.
Press PROG twice (or ACTION)
to exit this mode.
• If you're using a cable box, make sure that it is
tuned to the desired channel and the power is
left on for timer recording.
• PROG TIMER indicator lights on the unit.
Ready Check List
□ All connections are made.
□ Your unit is plugged in.
□ The clock is set to correct time,
□ The tape is long enough.
□ The record tab is in place.
__ primer Recording Using___
unit Buttons
You can set a Timer Recording
using ACTION key on the unit.
(See page 11.)
CH STOP/EJECT REWy®
0 0 0 0 I - I I - I
H Press STOP/EJECT and REW
together without a tape inserted
to display MAIN MENU.
1 Press AT + - to select “VCR”
and STOP/EJECT and REW
together to display SET UP
VCR screen.
© Press AT to select TIMER
PROGRAM” and + to display
the TIMER PROGRAM screen.
Repeat main steps 3 - 5 .
22
■ assistance, please call: 1'800-211-PANA(72e2) or send esnail to : [email protected]