Copy your tapes (dubbing), Connections you’ll need to make, Insert blank tape with record tab – Panasonic PV C1322 User Manual
Page 13: Select “line” mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Copy Your Tapes (Dubbing)
Connections you’ll need to make.
Playing (Source) VCR
Recording (Editing) unit
AUDIO VIDEO
OUT 0-1
0-1
© IN FROM ANT.
IN O
O
© OUT TO TV
Playback (Source)
1
Insert pre
recorded tape.
Recording (Editing) unit
Insert blank tape with
record tab.
• Dubbing tapes protected
with Copy Guard will have
poorquality results.
Select “LINE” mode.
See “Selecting Input Mode” below.
PAUSE
Press PLAY
then
1
►
PLAV
SLOW
PAUSE
at starting
point to put in
Standby mode.
o
o
Press REC,
then
PAUSE/SLOW
immediately to put in
Standby mode.
(Perform operation of steps 4 and 5 on both units at same time.)
Press PLAY
to start dubbing.
Press PAUSE/SLOW
to start dubbing.
Press STOP
to stop dubbing.
Press STOP
to stop dubbing.
Selecting Input Mode
Method 1:
Press CH
AT.
The display will change as follows.
.1
—
C
-*-i ♦
LINE«
(CABLE) (TV)
—► laS or 69
D
Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
Method 2:
a Press ACTION for MAIN MENU,
b
Press AT^ ► to select “TV", then press
ACTION for SET UP TV screen,
c Press
AT
to select “INPUT SELECT,” and
then press ► to select “TUNER" or “LINE."
d Press ACTION twice to exit this mode.
13