Leica Geosystems Leica mojoRTK - Manual (Page 55)

Leica mojoRTK, mojoRTK Base Station Operation 55
3.2.7 Rollback Software
Rollback software,
step-by-step

When performing a software rollback, ensure that the batteries are
charged and the base station is connected to external power. It is vitally
important that the device is not turned off during rollback.
1. Using , scroll to Service and press .
2. Using , scroll to Rollback Software and press .
3. Using , select Yes or No to select the software version and press to
select.

Rollback software consists of a number of steps that will be displayed on
the console, including Rebooting, Power Down, and Loading. This will take
approximately one minute.

Rollback software is only available when an earlier version of software was previously
installed on the base station.