Leica Geosystems Leica mojoRTK - Manual (Page 133)

Leica mojoRTK, Service 133
8.2 Upgrading Console Software via USB Memory Key
General informa-
tion The console software can be upgraded with software that has been loaded onto a
USB memory key. Refer to "B.3 Formatting USB Flash Drives" for important informa-
tion about using USB drives with the mojoRTK products.
Upgrade software
via USB key, step-
by-step

Do not turn off the mojoRTK console or remove the USB while the software
upgrade is underway.
1. Insert the USB key with the new software into one of the USB slots.
2. From the navigation screen, press to enter main menu.
3. Turn the main dial to select Service, and press .
4. Use the main dial to select Software, and press .
5. Use the main dial to select Upgrade Via USB, and press .
6. The system will perform the software upgrade and request that the system be
restarted.
7. To exit the menu without software upgrade, press until you return to the
main steering screen.

Remove the USB memory key only when the unit is powered down.