CANOGA PERKINS 9135 SNMP Managed 10/100/1000 Ethernet Switch - Manual (Page 45)

EdgeAccess Universal Chassis System
Model 9135 10/100/1000 5-3
5.3 Regulatory Compliance and Referenced Documents
Complies with these regulations:
• ETL, cETL (CAN/CSA-C22.2 No.60950/UL 60950)
• EN 60950, IEC 60950
• CDRH CFR21/EN60825-1
• FCC Part 15B, Class A, IC CS-003, C-Tick (AS/NZS 3548)
• EN 55022
• EN 55024
• EN 61000-3-2
• EN 61000-3-3
• R&TTE Directive (EN 300 386-2)
• NEBS Level 3
• CE Mark
Complies with these specifications and reference documents:
• IEEE 802.3
• RFC-1493 Bridge MIB
• RFC-1213 MIB-II
• IEEE 802.1d
• IEEE 802.1q
5.4 Interfaces and Connectors
Base Units
9135-4E 2-Port 10/100/1000 Ethernet Edge Switch, AC Power, Integrated Management
9135-5E 2-Port 10/100/1000 Ethernet Edge Switch, -48 VDC Power, Integrated Management
10/100BASE TX UTP Copper Field-Interchangeable Interfaces
9100-330 10/100BASE TX HW-or SW-Configurable UTP Copper Interface
10BASE FL Fiber Optic Field-Interchangeable Interfaces
9100-431 10BASE FL 850 nm MM LED with ST connectors, 15 dB w/ 62.5/125 Fiber
9100-631 10BASE FL 1310 nm SM Laser with ST connectors, 20 dB w/ 8 or 10/125 Fiber
9100-633 10BASE FL 1310 nm SM Laser with FC/PC connectors, 20 dB w/ 8 or 10/125 Fiber
9100-634 10BASE FL 1310 nm SM Laser with ST connectors, 10 dB w/ 8 or 10/125 Fiber
9100-635 10BASE FL 1310 nm SM Laser with FC/PC connectors, 10 dB w/ 8 or 10/125 Fiber
9100-637 10BASE FL 1310 nm SM Laser with ST connectors, 25 dB w/ 8 or 10/125 Fiber
9100-638 10BASE FL 1310 nm SM Laser with FC/PC connectors, 25 dB w/ 8 or 10/125 Fiber
9100-737 10BASE FL 1550 nm SM Laser with ST connectors, 26 dB w/8 or 10/125 Fiber
9100-738 10BASE FL 1550 nm SM Laser with FC/PC connectors, 26 dB w/8 or 10/125 Fiber