CANOGA PERKINS 9135 SNMP Managed 10/100/1000 Ethernet Switch User Manual
Page 21
EdgeAccess Universal Chassis System
Model 9135 10/100/1000
3-5
Table 8. IP Settings Menu Options
Menu Item
Description
1. Local IP Address
Set the network address of the 9135. The first octet of the IP
address defines the class, or how the IP address is split
between the network ID and the host ID. See Table 9.
2. Gateway IP Address
Set the address of the network node that connects to another
network.
3. Subnet Mask
Set the mask that determines the network ID portion of the IP
address. Set the network portion bits to 1. For a subnetwork,
set the host portion bits to 1.
4. Aging Time
Set how long a MAC address stays in the forwarding
database
5. Enable Download
Select TFTP and/or FTP for firmware upgrades or disable
downloads.
6. Enable BOOTP Mode
Set the 9135 to broadcast BOOTP requests to the local
network until it receives an IP address form the server or you
press
address, disable BOOTP.
7. Management VLAN Number Set the number of the Virtual LAN (VLAN) that the 9135
belongs to; default is 1.
8. Management VLAN Enabled Yes limits access to only the selected VLAN number;
No allows access from all locations; default is No.
9. Static ARP Table
Set the IP address, MAC address, and port for each
permanently installed manager.
10. Dynamic ARP Table
View the current information about the ports.
11. Main Menu
Return to the Main Menu
Table 9. IP Address and Subnet Mask
First Octet of IP Address
Default Subnet Mask
Class A
1-126
255.0.0.0
Class B
128-191 **
255.255.0.0
Class C
192-233
255.255.255.0
** Address 127 is reserved for loopback.