Casio Cassiopeia PA-2400 - Manual (Page 43)

43
FLCE (Idle Start)
< Description >
Passes the request right to the communication partner side and operates according to the function
that is requested by the partner.
If starting up the local machine with this mode, only the /Y command can be specified.
(If this is done, the normal mode instead of the idle start mode is entered. In other cases, if a
script file name is specified, a parameter error results and the function is terminated from the
error.)
Do not designate "H" as the mode parameter when specifying the "/Y" command.
(If "H" is designated a parameter error results and the function is terminated from the error.)
This function will be normally terminated by the reception of a termination command except
if a script file name is specified.
If a script file name is specified, communication will be performed according to the contents
of the script file that exists on the communication partner side.
If a script file name that does not exist on the communication partner side is specified, an error
code will be returned.
However, with H/PC-to-H/PC communication, a script file will not be processed. Therefore,
it will be ignored if specified.
< Format >
FLCE [/Y= { [Device], [Baud rate], [Mode] } ] [Script file name]
< Parameter >
Script file name
Specify a script file name that exists on the communication partner side. Always enclose a
script file name in quotation marks.
< Example >
Descriptions of parameters, such as those for file specification, are eliminated in this example.
In addition, assume the local machine is H/PC.
Connection with PC
FLCE
Communication partner: Up/down utility for host PC (command specification mode)