Casio Cassiopeia PA-2400 - Manual (Page 34)

34
To specify all files enter "*.*" as the file name.
A wild card can be used for the file name.
Directory names or file names can be described using 2-byte code characters.
Destination directory pathname
As the last input parameter of this command describe the destination directory name
of the communication partner side. If the specified directory does not exist, it will be
automatically created by the specified name.
Enter a "" as the delimiter of the directory name. If this specifications not made a
parameter error will result.
A wild card can be used for the file name.
Directory names can be described using 2-byte code characters.
Name the destination side directory pathname in accordance with the naming rule of
the communication partner-side OS.
< Examples >
FLCE /S "
casio*.dat" "d:casiodat"
This transfers a file that is located in the "casio" directory of the local machine which has a "DAT"
extension to the "d:
casiodat" directory of the communication partner side.
FLCE /SR "
casio*.dat" "d:casiodat"
This transfers all files under the "casio" directory (including the sub-directories) of the local machine
which have a "DAT" extension to the "d:
casiodat" directory of the communication partner side.