Casio Cassiopeia PA-2400 User Manual

Page 23

Default if the command-to-response interval time-out registry has no setup : 30 seconds
Registry position

HKEY_CURRENT_USERFLCE

Contents

Key name

Type

Value

BAUD

DWORD

Baud rate

DEVNM

STRING

Communication line (I/O device)

DRIVE

STRING

Path of a device defined as drive a:

DRIVE

STRING

Path of a device defined as drive b:

DRIVE

STRING

Path of a device defined as drive c:

DRIVE

STRING

Path of a device defined as drive z:

RECVWAIT

DWORD

Command-to-response interval time-out (second)

Possible values for communication line and baud rate setups

Communication line

: COM1, IrDA

Baud rate

: For RS-232C;

9600, 14400, 19200, 38400, 57600, 115200

: For IrDA;

9600, 38400, 115200

Any of the above listed baud rates can be set to either line.(only permitted baud rates can be set,

otherwise an error will result.)

Path to a device

A path to a device should be specified by the directory name to which the device is assigned.

Example: Object Store of the internal RAM

PC card or Compact Flash

Storage Card

Command-to-response interval time-out

Specify the time-out limit in seconds. If a value greater than 32768 (8000h) is specified, the

default value (30 seconds) will be used instead.