Casio Cassiopeia PA-2400 - Manual (Page 36)

36
Destination directory pathname
As the last input parameter of this command describe the destination directory name
of the communication partner side.
If the specified directory does not exist, it will be automatically created by the
specified name.
Enter a "" as the delimiter of the directory name. If this specifications not made a
parameter error will result.
Directory names can be described using 2-byte code characters.
< Examples >
FLCE /R "a:
12*.dat" "d:casio*.*" "casio data"
This transfers all files under the "12" directory of the drive A: which have a "DAT" extension and
all files under the "casio" of the drive D: of communication partner side to the "casio data" directory
of the local machine side.
FLCE /RR "a:
12*.dat" "d:casio*.*" "casio data"
This transfers all files under the "12" directory (including the sub-directories) of the drive A: which
have a "DAT"extension and all files under the "casio" directory (including the sub-directories) of the
drive D: of communication partner side to the "casio data" directory of the local machine side.