CANOGA PERKINS L357 Gigabit Ethernet Service Unit - Manual (Page 24)

EdgeAccess Universal Chassis System
L357 Gigabit Ethernet Service Unit 4-4
password and press . Otherwise, type your username and press , then type your
password and press .
4.3.4 DMM Main Menu
If you are using a DMM, after you log in, the Main Menu for the DMM appears. This is the main
management screen for the DMM. For details on all menu options, see the Model 1500 Domain
Management Module Users Manual (for UCS 1000) or Model 1502 Domain Management Module
Users Manual (for UCS 1002). From this screen, you can access the L357 by either of two methods.
• To reach the L357 directly, follow these steps:
a. Type 4, "Manage or access a specific Module," and press .
b. Type the slot and chassis numbers with a slash, such as " 1/4 " for chassis 1, slot 4, and then
press .
c. At the Module Menu, type 4 , "Access User Interface," then press to reach the Main
Menu screen for the L357.
• To reach the chassis, and then select the L357, follow these steps:
a. Type 3 , "Manage or access a specific Chassis," and press , press to cycle
between the chassis in the domain, and then press to select the chassis.
b. At the Chassis Management screen, press to cycle to the slot number for the L357,
then press to reach the Main Menu screen for the L357.
Note: In a UCS 1000 chassis, the slots in the BAM appear as A and B for the slot that the BAM is
in.
4.4 L357 Main Menu
The Main Menu appears after you log in and provides access to all functions for the L357: setup,
diagnostics, and reports. See Figure 10. Options 9, 10, and 11 are available only when the L357 is in a
standalone enclosure.
MAIN MENU
1) System Configuration
2) Diagnostics
3) Link status
4) System Alarms
5) Layer 2 Statistics
6) System Log
7) Utilities
8) Software Upgrade
9) Change Password
10) Manage Logged In Users
11) Logout
Figure 10. L357 Main Menu