C. Crane CWTPL - Manual (Page 21)

CC Witness+ Page 21
Display Screens and Functions
buttons to move to the next or previous timer
setting. When all settings are set, save the timer
setup by pressing the PLAY Button.
Timer Settings explained:
“Timer”
— Select which timer, by number, to setup.
There are 20 timers available in the CC Witness+.
“Status”
— Choose whether the timer will “Record”
or “Play” when activated. Set to “OFF” to reset timer
back to default settings.
“Memory”
— Choose to record or play using the
“Internal” or the (optional) “SD Card” memory.
“Source”
— If the timer “Status” is set to record,
then select which source (“AM”, “FM”, “MIC”, or
“LINE”) to record from. If the timer “status” is set to
play, then select which source (“AM” radio, “FM”
radio, or a saved “File”) to play from.
“Preset”
— If you have set radio stations to memory
presets, then you can select them in this setting.
“Freq”
— Manually tune to the desired radio station.
“Day(s)”
— Choose to play or record on a specific
“Date” or “Weekday”. If “Weekday” is selected, then
by default every day will be selected to activate the
timer. To choose specific days, highlight “Daily” and
press the RIGHT or LEFT button to bring up a
weekday selection screen. Mark or unmark week
days by pressing the DOWN button. When finished,
press the PLAY Button to continue.
“Start”
— Sets the time when the timer will “Start”.
“End”
— Sets the time when the timer will “End”.
When finished and all settings are set, press the
PLAY Button to save the setup. Confirm by
selecting “YES”. To exit the timer setup without
saving, press the BACK button, then confirm by
selecting “NO”.
2. “Review Timers”
This screen displays the status of all 20 timers. Timers
set to record are marked with an “R” next to the timer
number. Timers set to play are marked with a “P” next
to the timer number. It is possible to review and modify
a timer setting by pressing the PLAY Button when the
timer is highlighted.
3. “All Timers ON/OFF” — This setting is useful for
turning “Off” or disabling all your timers without erasing
the settings. When set from “OFF” to “On” all timers
will retain their previous setups.