C. Crane CWTPL - Manual (Page 20)

Page 20 CC Witness+
Display Screens and Functions
“TIMERS”
1. “Set Timers”
The “Timers” screen has three main functions:
Use the RIGHT and LEFT buttons to modify timer
settings. Use the UP and DOWN.
names from recordings will display month, day,
year, time, track number, freq/recording source, and
format.
g. “10 or 9 KHZ” —If using the CC Witness+ to listen
to AM radio in Europe, use this setting to switch
AM Radio to 9kHz AM tuning steps.
Note:
All timer schedules and radio station
memory presets will be erased when switching
between 10kHz for North America and 9kHz
tuning steps for Europe. You may want to write
down your presets before using this function.
h. “Memory Info” — This screen will display the
total and free amount of memory remaining for the
Internal and (optional) SD card memories. Also, the
firmware version will be displayed at the bottom of
this screen.