C. Crane CWTPL - Manual (Page 12)

Page 12 CC Witness+
Display Screens and Functions
the “MENU” screen, then press and release the PLAY
Button. The radio will play automatically. To exit, press
the MENU or BACK button.
2. Tuning Stations — Press the RIGHT Button to tune to
a higher frequency. Press the LEFT Button to tune to a
lower frequency.
3. Preset a Station to Memory —
a. While playing a radio station, press and release
the PLAY Button.
b. Select the desired preset memory number by
pressing UP or DOWN.
c. When the desired preset memory number is
blinking, press the PLAY Button to confirm.
Note:
There are 10 memory presets available on each
band.
4. To recall a Station from Memory Preset — Press
the UP or DOWN to recall memory presets.
5. Delete a Station from Memory Preset — While
playing a station that is preset, press the BACK Button.
A message will ask you to confirm the deletion of the
preset. Highlight “Yes” then press the PLAY Button to
confirm.
6. Record a Radio Station — While playing a station,
press and release the REC button. Press again to
stop a recording.
See page 24 for more about recording.
The “AM” & “FM” radio screens have 6 functions:
1. Playing AM or FM Radio – Select “AM” or “FM” from
“AM” AND “FM” RADIO SCREEN
to save your timer. See page 20 for more information.
6. To Record
from Mic or Line-in Jack— While in menu
screen, press and release the REC Button to record
from the internal microphone or LINE/MIC jack.