beautypg.com

BendixKing KLN 35A - Pilots Guide System KLN 35A User Manual

Page 77

background image

Basic GPS Operation

3-42

Effective Date 5/95 006-08791-0000 Rev 0

Basic GPS Operation

Chapter 3

When you are navigating with a flight plan (see

section 4.2

), the NAV

4 page displays the waypoints of the active flight plan (FPL 0) with
their waypoint identifiers (

figure 3-121

). Course lines connect the

flight plan waypoints.

When operating Direct To a waypoint
which is not in the active flight plan,
the direct to waypoint is shown on the
map, and although the waypoints of
the active flight plan are still shown on
the screen, they are not connected by
course lines (figure 3-122).

In the lower left corner of the map display area is the map range
scale in nautical miles. The range scale indicates the distance from
the aircraft’s position to the top of the screen. You may select a
range scale of 1 NM to 500 NM with several choices in between by

turning on the cursor (

B

), and using

the right inner knob to select the
desired range scale. For example,
figure 3-123 illustrates the results of
changing the range scale of the map
in figure 3-122 from 60 nautical miles
to 30 nautical miles.

Additionally, there is a choice called AUTO, for automatic range scal-
ing. This choice is sandwiched between the 1 NM scale and the 500
NM scale, such that it is “below” 1 NM and “above” 500 NM. The
AUTO scale factor feature “zooms” the map in and out in a useful
way so that you don’t have to. Specifically, AUTO chooses the small-
est map scale that will display the active waypoint and, if there is one,
the waypoint after the active waypoint. Choosing the AUTO scale
factor means there is one less item for you to worry about.

Aside from changing the map range
scale, all other customization of the
map display is done from the menu.
Notice that when you turn on the cur-
sor (

B

), the Menu? field appears

above the range scale. Turn the right
outer knob one step counter-clock-
wise to move the cursor over the
Menu? field (figure 3-124) and press

F

. The menu now “pops-up” on the

screen (figure 3-125).

17.6nm
SGJ

{

>Leg

>117kt

APT VOR NDB SUP ACT NAV FPL CAL SET OTH

SUA:

off

VOR:off
APT:off
112°KJAX

"

KORL

OMN

%

%

% %ORL

GJ

Figure 3-125

24.2nm
2CB

{

>Leg

>117kt

APT VOR NDB SUP ACT NAV FPL CAL SET OTH

30

KJAX

"

SGJ

2CB

%

%

%

%

Figure 3-123

28.0nm
2CB

{

>Leg

>117kt

APT VOR NDB SUP ACT NAV FPL CAL SET OTH

60

KJAX

"

SGJ

2CB

%

%

%

%

%

OMN

ORL

Figure 3-122

17.6nm
SGJ

{

>Leg

>117kt

APT VOR NDB SUP ACT NAV FPL CAL SET OTH

Menu?

60 KJAX

"

KORL

OMN

%

%

% %ORL

SGJ

Figure 3-124