FaxBack Port Server RADIUS Support (RFC 2865, 2866) - Manual (Page 24)

FaxBack Proprietary and Confidential Page 24 of 58
Attributes:
Len=18, Type=Vendor-Specific(26), Id=FaxBack(30694)
Len=6, Type=FB-Command(1)
Value=Get-Call-Ahead-Mode(5)
Len=6, Type=FB-Context(2)
Value=Pre-Send-Session(3)
Len=12, Type=User-Name(1)
Value=5551231234
Len=18, Type=Acct-Session-Id(44)
Value=1249336279265000
End
◄── RESPONSE TO PORT SERVER ───
Required Purpose
RADIUS code Access-Accept or Access-Reject
Optional Purpose
FB-Call-Ahead-Mode Specifies whether the fax ATA should call-ahead to verify the fax
number, or whether it should immediately begin to receive the fax
from the connected fax machine.
A value of 0 means do not call-ahead. Any non-zero value means do
call-ahead.
If the FB-Call-Ahead-Mode attribute is missing from the response, or
there is no response, then the Port Server will flag the fax ATA to
call-ahead.
Response Packet
Code=Access-Accept(2)
Packet identifier=15
Length=32
Authenticator
45 92 32 67 8D D1 85 46 B0 52 B4 48 64 FB D3 BD
Attributes:
Len=12, Type=Vendor-Specific(26), Id=FaxBack(30694)
Len=6, Type=FB-Call-Ahead-Mode(61)
Value=0
End
Get-Account-From-Sender-Email-Address / For-External-Module
Sent when the e-mail gateway component needs to verify that the “From” e-mail address for an
outbound fax is associated with a known account. The account information that is returned can
be used to further authorize the sender.
The RADIUS server must respond with an Access-Accept packet that includes at a minimum an
account name in the “User-Name” attribute, or an Access-Reject packet if the sender e-mail
address is not associated with any account. If the e-mail address maps to a known account, but
sending is disabled for the account for some reason, instead of returning an Access-Reject
packet the RADIUS server can return an Access-Accept packet that includes the “FB-Snd-From-
Account” attribute with a value of 0.
─── SENT FROM PORT SERVER ──►