FaxBack Port Server RADIUS Support (RFC 2865, 2866) - Manual (Page 16)

FaxBack Proprietary and Confidential Page 16 of 58
FB-Save-CDR Determines if a CDR will be saved for this session.
FB-Snd-ANI Specifies an ANI to use for the telephony session.
FB-Snd-TSID Specifies a TSID to use for the T.30 session.
FB-Rule-Group Specifies the rule group that will be used by Send Routing processing
that will be performed by the port server when the RADIUS request
returns. If no group is specified, the account will be considered a
member of the “Default Rule Group”.
Response Packet
Code=Access-Accept(2)
Packet identifier=118
Length=20
Authenticator
5A 91 F7 14 E1 63 E8 49 B7 55 3C 98 6C E8 BE C8
End
Get-Account / Pre-Receive-Session
Sent when the port server is about to receive a fax, and needs to retrieve the most recent
information for the account that is designated to receive the fax. The specified account might be
the account mapped to a DID, or if that account is unable to receive a fax, then the specified
account might be that of a “failover receive account”.
The RADIUS server must respond with an Access-Accept packet if the account is valid, or an
Access-Reject packet if not valid. If the account is known, but receiving is disabled for the
account for some reason, instead of returning an Access-Reject packet the RADIUS server can
return an Access-Accept packet that includes the “FB-Rcv-To-Account” attribute with a value of 0.
─── SENT FROM PORT SERVER ──►
Attribute Value
FB-Command Get-Account (1)
FB-Context Pre-Receive-Session (4)
User-Name The account requesting to receive a fax.
Acct-Session-Id The session id of the new receive fax session.
Request Packet
Code=Access-Request(1)
Packet identifier=2
Length=111
Authenticator
B3 7E 5D 1C 63 6E 96 4C A3 0B E8 3D 40 61 7B 42
Attributes:
Len=18, Type=Vendor-Specific(26), Id=FaxBack(30694)
Len=6, Type=FB-Command(1)
Value=Get-Account(1)
Len=6, Type=FB-Context(2)
Value=Pre-Receive-Session(4)
Len=9, Type=User-Name(1)
Value=account