FaxBack Port Server RADIUS Support (RFC 2865, 2866) - Manual (Page 17)

FaxBack Proprietary and Confidential Page 17 of 58
Len=34, Type=Acct-Session-Id(44)
Value=03bb96b4af2d41f08dd0e46c250c274f
Len=18, Type=Vendor-Specific(26), Id=FaxBack(30694)
Len=12, Type=FB-Dial-Number(34)
Value=5551112345
Len=12, Type=Vendor-Specific(26), Id=FaxBack(30694)
Len=6, Type=FB-Transfer-Type(58)
Value=1
End
◄── RESPONSE TO PORT SERVER ───
Required Purpose
RADIUS code Access-Accept or Access-Reject
Optional Purpose
FB-Rcv-To-Account Determines if the known/valid account is allowed to receive.
FB-CDR-Info, FB-Customer,
FB-Source
Information from the account that will be saved in the CDR at the
end of the session.
FB-Save-CDR Determines if a CDR will be saved for this session.
FB-Rcv-CSID Specifies a CSID to use for the T.30 session.
FB-Rcv-Failover-Account-Id Specifies an alternate account to receive the fax in case the
account is unavailable.
FB-Rcv-Failover-Mode Determines if the account specified by the “FB-Rcv-Failover-
Account-Id” attribute should only receive faxes if the primary
account is busy or unavailable, or if it should always receive faxes
that were routed to the primary account.
FB-Last-Modified-Time For an account that is a load-balance group, the value of this
attribute is used to tell the port server if the group membership
has changed since the last time the port server dealt with the
group.
Response Packet
Code=Access-Accept(2)
Packet identifier=34
Length=20
Authenticator
5A 91 F7 14 E1 63 E8 49 B7 55 3C 98 6C E8 BE C8
End
Get-Account / For-External-Module
Sent when an external component requests information about an account.
─── SENT FROM PORT SERVER ──►
Attribute Value
FB-Command Get-Account (1)
FB-Context For-External-Module (5)