Pigtronix Infinity Looper - Manual (Page 8)

CHAPTER 2. ANATOMY AND FUNCTIONS 7
Stop
Quickly pressing the Stop footswitch will stop audio playback on one
or both loops, depending on the Arm/All setting (see below).
Holding down the Stop footswitch for at least two seconds will cause
loop audio to be erased from one or both loops, depending on the
Arm/All setting.
2.2 Toggle Switches
Stop Mode
Quickly pressing the Stop Mode switch will toggle between Arm and
All modes.
Holding down the Stop Mode switch will toggle between Full, Trail
and Fade modes.
Arm, All
In All mode, the Stop footswitch will stop playback on both loops.
The All functionality also applies to the erase command. With ALL
selected, holding down the Stop footswitch will erase both loops. The
All functionality also applies to the Play command. Once the loops
are stopped, hitting either loop footswitch will resume playback on
both loops.
In Arm mode, the Stop footswitch will stop playback only on the
armed loop. The arm functionality also applies to the erase command.
In Arm mode, holding down the Stop footswitch will erase only the
armed loop (to stop both loops in Arm mode, hit the Stop footswitch