Pigtronix Infinity Looper - Manual (Page 29)

CHAPTER 3. INFINITY RULES 28
# of Semi-
tones Interval Up Speed
(%) Down Speed
(%)
1 Minor Second .94 1.07
2 Major Second 0.89 1.13
3 Minor Third 0.83 1.2
4 Major Third 0.8 1.25
5 Perfect Fourth 0.75 1.33
6 Diminished Fifth 0.70 1.42
7 Perfect Fifth 0.67 1.50
8 Minor Sixth 0.63 1.6
9 Major Sixth 0.60 1.67
10 Minor Seventh 0.56 1.80
11 Major Seventh 0.53 1.88
12 Perfect Octave 0.50 2.00
3.16 Boot Options
Each of the footswitches can be pressed during power up to enable
and disable a specialty global setting on the Infinity Looper. These
settings are sticky and will remain set even after removing power from
the Infinity.
Auto Zero Record
Hold Loop 1 during boot to toggle Auto Zero Record.
With Auto Zero Record off (Loop 1 LED is off during boot), the
MIDI downbeat is reset on the first received note or MIDI start, the
sample-rate of empty loops is automatically set to 48 kHz.
With Auto Zero Record on (Loop 1 LED is lit red during boot), the
MIDI counter is reset on the initial record of Loop 1, the sample-rate