Rane MP 4 Manual 1.9.2 - Manual (Page 30)

RANE MP 4 FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 1.9.2 30
dECLaRaTION OF CONFORmITy
appLICaTION OF
COuNCIL dIRECTIVE:
2006/95/EC
2004/108/EC
2002/96/EC
2002/95/EC
maNuFaCTuRER:
Rane Corporation
10802 47th avenue West
mukilteo Wa 98275-5098 uSa
This equipment has been tested and found to be in compliance with all applicable standards and regulations applying to the Electromagnetic Compatibility
(EMC) directive, 89/336/EEC. In order for the customer to maintain compliance with this regulation, high quality shielded cable must be used for
interconnection to other equipment. Modification of the equipment, other than that expressly outlined by the manufacturer, is not allowed under this
directive. The user of this equipment shall accept full responsibility for compliance with the EMC directive in the event that the equipment is modified
without written consent of the manufacturer.
TypE OF EquIpmENT:
Professional Audio Signal Processing
mOdEL: mp 4
Immunity Results: THD+N re:4dBu,400Hz sine, BW=20-20 kHz, Baseline: -65 dBr
Test description measurement Conditions
RF Electromagnetic Fields Immunity
80 MHz -1000 MHz, 1 kHz AM, 80% depth, 3V/m
-65dBr 80 MHz - 350 MHz
-46dBr 350 MHz - 650 MHz
-57dBr 650 MHz - 1000 MHz
Conducted RF disturbances Immunity
150 kHz - 80 MHz, 1 kHz AM, 80% depth, 3V rms
-65dBr Power Lines, 150 kHz - 6.3 MHz
-50dBr Power Lines, 6.3 MHz - 11.5 MHz
-60dBr Power Lines, 11.5 MHz - 18.5 MHz
-65dBr Power Lines, 18.5 MHz - 80 MHz
-65dBr Signal and Control Lines, 150 kHz - 80 MHz
magnetic Fields Immunity
50Hz - 10kHz, 4.0 - 0.4 A/m
-65dBr 50 Hz - 10 kHz
I, the undersigned, hereby declare that the equipment specified above conforms
to the Directive(s) and Standard(s) shown above.
(Signature)
april 26, 2005
(Date)
mukilteo Wa uSa
(Place)
Compliance Engineer
(Position)
Roy G. Gill
(Full Name)
STaNdaRd(S) TO WhICh
CONFORmITy IS dECLaREd:
EN60065:Ed. 7.1 (2005)
EN55103-1:1996
EN55103-2:1996
ENVIRONMENT E2
SERIAL NUMBERS 600000-700000