2 installation and connection, Installation and connection, Carrying connecting to a computer – Canon DR-5080C User Manual

Page 26: Connecting the scsi cable, Setting the scsi id and terminator, Connecting the power cord, Carrying

ENGLISH

Installation and Connection

This section describes scanner installation and connection.

For details on the scanner installation location, see “About the Installation Location” in

the Safety Precautions (P.8).

Carrying

When you move the DR-5020/5080C, hold it firmly with both hands as shown in
the figure below and carry it carefully. If you carry it without holding its handles,
you may drop it, nip your fingers and cause unexpected injuries. The scanner
weights approximately 20 kg (44.2 lb).

Before you move the scanner, always turn the power switch OFF and disconnect the

power cord from the power outlet. Also, disconnect the SCSI cable from the connector.

Moving the scanner with the power still ON or the SCSI cable still connected might

result in electrical shock.

2.2 Installation and Connection

MEMO

WARNING