Chemtronics Chemask HT - High Temperature CMHT8 - Manual (Page 2)

APPLICATION METHODS
Squeeze Bottle/Syringe Yes
Spatula Yes
Screening Yes
Automatic Dispensing Yes
Removal By hand
Clean-up before curing Use water
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Chemask

HT solder masking agent is engineered
for all electronic manufacturing applications. When
applying by hand using squeeze bottle or spatula,
insure that all areas of the pre-tinned hole are evenly
covered on the side to be soldered. Automatic
dispensing equipment may also be used as
appropriate. Chemask

HT may also be screen
printed. Depending on ambient conditions,
temporary mask may remain on assemblies for
extended periods of time prior to processing.
REMOVAL:
After allowing the Chemask® HT to fully cure, the
temporary mask can be removed by hand or using
tweezers. When removing after long term heat
exposure allow the surface 5 minutes to cool before
removal.
AVAILABILITY
CMHT8 8 oz. Squeeze Bottle
CMHT1 1 Gal. Liquid
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to answer
your technical and application related questions.
The toll free number is 1-800-TECH-401, or e-mail
us at
[email protected] .
Chemtronics is also accessible on the web. Visit us
at www.chemtronics.com.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 0.0%
HCFC 0.0% HFC 0.0%
GWP 0 ODP 0.0
CFC, HCFC, VOC, and HFC numbers shown are the content by
weight. Ozone depletion potential (ODP) is determined in
accordance with the Montreal Protocol and U.S. Clean Air Act
of 1990. The ODP of this product is 0.0. It is the sum of the
ODP of the substances that may contribute to the depletion of
stratospheric ozone, based upon the weight of each substance in
the product’s formulation
. Global warming potential (GWP) is
calculated based on a 100 year time horizon. Carbon dioxide
has a GWP of 1.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to
evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
Chemtronics

and Chemask

are a registered trademark of
Chemtronics. All rights reserved. All rights reserved. All other
trademarks herein are trademarks or registered trademarks of their
respective owners.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
Rev. B (05/14)
DISTRIBUTED BY: