Chemtronics Typhoon Blast 70 Duster ES1025 User Manual
Technical data sheet, Typhoon blast, Duster

PRODUCT DESCRIPTION
Typhoon Blast™ 70 Duster is engineered to provide
effective particle removal from sensitive and difficult to
reach surfaces, while minimizing global warming impact.
It provides a more economical alternative to Typhoon
Blast™, and also provides a lower blasting force at the
nozzle. This moisture free and oil free duster provides the
cleanest and most efficient, non-contact method available
for particle removal. It is also efficient as a means to
quickly remove slow-drying solvents.
High pressure for particle removal and contamination
control
Useful for drying and removing solvents from
surfaces
Ultra-low global warming impact of 6
Nonflammable
Nonabrasive and Noncorrosive
Leaves no residue
Ultra-pure, filtered to <0.2 microns
CFC, HCFC and HFC free
VOC free
Non-ozone depleting
TYPICAL APPLICATIONS
Typhoon Blast™ 70 Duster is engineered for all aspects
of electronic equipment maintenance and is particularly
suited for applications involving:
Audio/Video Equipment
Computers and Other Electronic Equipment
Telephone Junction Panels
Network Routers and Switches
Lenses and Optical Surfaces
Office Equipment, Paper Shredders, Fax
Machines and Printers
Laboratory Instruments
Photo Equipment
Printed Circuit Boards
Electrical Connectors and Contacts
TYPICAL PRODUCT DATA AND PHYSICAL
PROPERTIES
Boiling Point -2 °F / -19 °C
Internal Pressure
47 psia @ 70 °F
Vapor Density (air=1)
@ 77
°F
4.0
Solubility in Water
@ 77
°F F/1 atm
0.10% by weight
Specific Gravity
(water = 1 @77
°F)
1.17
Evaporation Rate >1
(butyl acetate=1)
Appearance Clear, Colorless
Liquified Gas
Odor
Slight Ethereal
Global Warming Potential
6.0*
Flash Point (TCC)
None
Shelflife 5 years
RoHS/WEEE
Status
*Global warming potential (GWP) is calculated based on a 100
year time horizon. Carbon dioxide has a GWP of 1.
COMPATIBILITY
Typhoon Blast™ 70 Duster is generally compatible
with most materials used in printed circuit board
fabrication, including sensitive plastics and
compounds. As with any duster/cleaner,
compatibility must be determined on a non-critical
area prior to use.
TDS # 1025
CHEMTRONICS
Technical Data Sheet
Typhoon Blast™
70
Duster