Chemtronics Typhoon Blast All-Way ES1624 User Manual
Technical data sheet, Typhoon blast, All-way duster

PRODUCT DESCRIPTION
Typhoon Blast™ All-Way Duster can be sprayed right-
side up and upside down emitting a high pressure blast
that cleans electronics without scratching delicate
surfaces. This compressed gas duster offers exceptionally
low global warming impact (GWP = 6) when compared to
traditional dusters utilizing HFC-134a (GWP = 1300) or
HFC-152a (GWP = 140)*. This moisture free and oil free
duster provides the cleanest and most efficient, non-
contact method available for particle removal. It is also
efficient as a means to quickly remove slow-drying
solvents.
High pressure duster sprays any direction, even
upside down
Ideal for particle removal and contamination control
Useful for drying and removing solvents from
surfaces
Ultra-low global warming impact of 6
Nonflammable
Nonabrasive and Noncorrosive, Leaves no residue
Ultra-pure, filtered to <0.2 microns
CFC, HCFC and HFC free
VOC free
TYPICAL APPLICATIONS
Typhoon Blast™ All-Way Duster is engineered for all
aspects of electronic equipment maintenance and is
particularly suited for applications involving:
Audio/Video Equipment
Computers and Other Electronic Equipment
Telephone Junction Panels
Network Routers and Switches
Lenses and Optical Surfaces
Office Equipment, Paper Shredders, Fax
Machines and Printers
Laboratory Instruments
Photo Equipment
Printed Circuit Boards
Electrical Connectors and Contacts
TYPICAL PRODUCT DATA AND PHYSICAL
PROPERTIES
Boiling Point - 2 °F / -19 °C
Internal Pressure
47 psia @ 70 °F
Vapor Density (air=1)
@ 77
°F
4.0
Solubility in Water
@ 77
°F F/1 atm
0.10% by weight
Specific Gravity
(water = 1 @77
°F)
1.17
Evaporation Rate >1
(butyl acetate=1)
Appearance Clear, Colorless
Liquified Gas
Odor
Slight Ethereal
Global Warming Potential
6.0*
Flash Point (TCC)
None
Shelflife 5 years
RoHS/WEEE
Status
*Global warming potential (GWP) is calculated based on a 100
year time horizon. Carbon dioxide has a GWP of 1.
COMPATIBILITY
Typhoon Blast™ All-Way Duster is generally
compatible with most materials used in printed
circuit board fabrication, including sensitive plastics
and compounds. As with any duster/cleaner,
compatibility must be determined on a non-critical
area prior to use.
TDS # 1624
CHEMTRONICS
Technical Data Sheet
Typhoon Blast
™
All-Way Duster