Chemtronics Ultrajet 70 ES1015 - Manual

PRODUCT DESCRIPTION
Ultrajet

70 is an economical general-purpose
duster with a new BIGGER blast for
electronic applications. Its exceptional purity
jet instantly cleans surfaces free of particulate
contamination. Ultrajet

70 is engineered to
remove dirt, dust, oxide particles and other
airborne particles instantly, and can be used
to facilitate the accelerated drying of solvent
cleaners.
 Filtered to 0.2 microns
 Ozone safe; CFC and HCFC free
 Nonflammable; may be used on
energized equipment
 Nonabrasive; safe for most materials.
Will not scratch surfaces
 No residue
 Cleans hard to reach areas
TYPICAL APPLICATIONS
Ultrajet

70 is used in a wide range of
applications including:
 Audio/Video Equipment
 Fax Machines
 Keyboards
 Laboratory Instruments
 Microcomputers
 Photo Equipment
 Printers
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point -15.7
°F
Vapor Density (air=1)
@ 77
°F
3.18
Solubility in Water
@ 77
°F F/1 atm
0.10% by weight
Specific Gravity
(water = 1 @77
°F)
1.21
Evaporation Rate >1
(butyl acetate=1)
Appearance Clear, Colorless Gas
Odor Slight Ethereal
Surface Tension
(dynes/cm @77
°F)
7.8
Flash Point (TCC) None
Shelflife 5 years
COMPATIBILITY
Ultrajet

70 is generally compatible with
most materials used in printed circuit board
fabrication, including sensitive plastics and
compounds. As with any duster/cleaner,
compatibility must be determined on a non-
critical area prior to use.
TDS # 1015
CHEMTRONICS
Technical Data Sheet
Ultrajet

70