Chemtronics Twillwipes C900 - Manual

CHEMTRONICS
Technical Data Sheet
Twillwipes

TDS #C900
PRODUCT DESCRIPTION
Twillwipes

are made of 100% cotton twill
fabric, cut on the bias to prevent fraying. These
wipers have excellent absorbency, as well as high
strength, especially when wet with water.
Twillwipes
 are ideal for high temperature
applications that would melt most other wipes.
 Excellent temperature, organic solvent, base and
dilute acid resistance
 Excellent durability and strength
 Excellent particle entrapment
 High absorbency capacity and rate
 Packaged in a Class 100 environment
 Low linting

Commonly used in Class 1000 and Class 10,000 cleanrooms
10,000 cleanrooms
TYPICAL APPLICATIONS
Twillwipes
 can be used to:
 Clean Water Processing Areas
 Clean-up Bases and other Chemical spills
 Wipe Down Machinery and
Instrumentation
 Clean Photo-Mask Areas
 Wipe High temperature Equipment
COMPATIBILITY Twillwipes
 are
compatible with most common solvents
such as isopropyl alcohol, methanol. and
ketones such as acetone or methyl ethyl
ketone. These wipes are generally
compatible with strong bases and dilute or
weak acids. These wipes can also withstand
temperatures of up to 302
0
F (150
0
C).
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Wipe Material
100 % Woven
Cotton Twill
Material, Bias Cut
Wipe Product
Codes C900
Availability
9” x 9”
Basis Weight
165 g/m 2
Absorbency
(Capacity)
( Rate) 10 x
1 Sec
Strength
92 lbs.
(Tensile Average)
Thickness
0.25 mm
(0.010 inches)
The wipes were tested by Particle Measurement
Technology. The wipe tests were done using the
recommended practices of the Institute of
Environmental Sciences, Swabs and Wipes
Working Group.